• Increase font size
  • Default font size
  • Decrease font size
Electronic Controls

e_components_8

Additional Heater Control Module

Application

Control Module for additional heating booster

Characteristics

CAN signal:

  • External temperature
  • Coolant temperature
  • Battery voltage
  • Engine speed
  • HVAC signal
  • Two output driver for external relays 500/750W

Hard Wired signal:

  • Fan blower feedback
  • Max hot feedback

Diagnostic capabilities

e_components_5

Door Zone Module - NGP

Innovation

Door Zone Module (NGP) is a ECU for FIAT Nano Florence architecture. It manage doors and windows lifter; CAN-Bus provide diagnosis and communications with all others ECUs.

Characteristics

  • Lock / Unlock doors management (front/rear motors and fuel lid).
  • Dead-Lock management (front and rear motors)
  • Trunk release.
  • Rear window release.
  • Windows lifter management (motor command, anti-pinch sensor, rear windows lifter inhibition, door command back-light management).
  • NGP is connected to the low speed B-CAN (50Kbit/s).

e_control_1

EGR Electronic Control Module

Application

Diesel vehicles with close loop EGR.

Innovation

Programmable according to customer engine maps via serial port.

Characteristics
  • PWM control of the EGR solenoid valve.
  • Diagnostic output ISO 9141.
  • Disable A/C compressor during vehicle acceleration and cranking.
  • Optional glow plugs control.
  • Optional injection pump phase control.
  • Optional engine cooling fan control.
  • Suitable for engine compartment environment.

e_components_6

Electronic Door Module NPG - NVB

Application

Multifunction Car Door Module.

Characteristics

  • Car Window Lifter.
  • Electric Lock/Unlock.
  • Dead Lock.
  • Side Mirrors Defrost.
  • Side Mirror Adjustment.
  • External Temperature Measure.
  • Diagnostic Line.
  • B-CAN 2.0 Network.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  3 
  •  Next 
  •  End 
  • »
Page 1 of 3