• Increase font size
  • Default font size
  • Decrease font size

water-softener-1

water-softener-2

water-softener-3

water-softener-4

Water Softeners

The function of the water softeners is to remove the hardness, in the form of calcium and magnesium in the water used in a dishwasher.
Various models are produced, ranging from simple units with resin and salt containers to models which incorporate the air-break and the water inlet controls, either volumetric, by flow meter or by pressure sensor.

We produce also models designed for resin regeneration and rinsing in the opposite direction to the inlet flow, thereby improving the performance and reducing the consumption of water and salt, while also reducing the risk of corrosion of the tub and cutlery.

The latest models have, as an optional, the incorporation of an electronic system able to measure the remaining softening capability of the softener, a switching solenoid valve and an overflow sensor.

 

Regeneration can be realised in different ways:
  • traditional, with regeneration tank (type 436) in the air break
  • with switching valve, where regeneration tank is not required (type 437)
  • with 2 air break for dishwasher with double inlet valve (the first one for inlet water and the second one for the regeneration). in this case the regeneration is controlled by the timer (type 425-427)
  • with regeneration flow opposite to filling flow (type 428)